Skip to main content

PowerLight lite – the small universal light

PowerLight lite SLA-3D on own glasses

PowerLight lite

The LEDental PowerLight lite is a small, very light and yet bright universal headlamp. The weight varies between 10g and 20g depending on the mounting clip. The LED has a bright, focussed light centre, which tapers off gently. It can therefore be used without magnifying glasses, without the eyes being exposed to strong differences in brightness due to a strongly focussed light and thus tiring quickly.
The joint enables optimum adjustment of the light.

The light is available in two light colours, a white LED or in the NLC (No Light Curing) variant. The latter has a high-power LED with a warmer light colour, comparable to halogen light. This does not start the light polymerisation of the composites. This means that composite fillings can be placed in peace under optimal lighting without the annoying premature start of curing by the light source. The NLC version is particularly recommended for dental students.

The  Power Box 350 serves as the energy source.

You can find more details in the  technical data.

PowerLight lite 550

PowerLight lite 550

The casing of the LEDental PowerLight lite 550 is slightly larger. The design allows the LED circuit board to be better cooled and the LED to be operated with a higher current. This increases the brightness by around 45%.
Otherwise, the lamp is identical to the PowerLight lite.
The PowerLight lite 550 also has a bright, focussed light centre that fades gently. It can therefore be used without magnifying glasses, without the eyes being exposed to strong differences in brightness and thus quickly tiring.
The weight varies between 18g and 28g depending on the mounting clip. The joint allows for optimal adjustment of the light.

The  Power Box 550 serves as the energy source.

You can find more details in the  technical data.

Cable coupling of the PowerLight on the patient

Intelligent cable coupling

Our PowerLight lamps have an intelligent cable coupling.

The Power Box is attached to the belt in the area of the back pocket.

The cable extension runs along the back, preferably under the clothing from the Power Box on the belt to the collar. The pre-mounted cable clip "strain relief" is used to attach the coupling of the extension cable to the collar.

The cable of the PowerLight can be attached to the temple of the glasses with the help of pre-mounted rubber rings. Its plug is inserted into the coupling of the extension cable.

In this way, the glasses or magnifying glasses with the LED can be put aside while the cable remains at the back of the Power Box with it on the body.

Clips for PowerLight lite

There are different clips for attaching the PowerLight lite to our components or to your existing glasses or magnifying glasses. The table shows which clips are suitable for the PowerLight lite.

We have made it our business to be able to attach our lights to any pair of glasses or magnifying glasses.
With the help of the SLA3-D printing process, individual solutions can also be created. If in doubt, send us an email with good photos of your glasses or magnifying glasses.

Universal Universal
fits almost every pair of glasses
read more
Neodym Clip Neodym
with neodymium magnet or or permanently mounted
read more
Sporty Clip Sporty / Orascoptic®
for all attachments
of LEDental and
Magnifying Glasses from Orascoptic®
read more
Loupe Clip Loupe 2.5/3.5
Loupe clip for optics 2.5 & 3.5
read more
Personal Clip Personal
Clip with stainless steel spring
individual for each pair of glasses
read more
SLA-3D Clip SLA-3D
individual solutions by means of
Stereolithography 3-D printing
read more

Contact

If you have any unanswered questions, please use our special "PowerLight contact form".
We will contact you as soon as possible.

Contact form